Cobra Brushless Multirotor Motors offer performance and value for Your RC Models. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.
The Cobra CM-2204 series motors have a 3.0mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2204 motors come without bullet connectors and feature extended pre-tinned motor leads that are 4-1/2 inches (110mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.
The newest version of the CM-2204 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.
Included with every Cobra CM-2204 Series Motor is a complete accessory package which contains the following items:
Click here for the Cobra CM-2204/32 Propeller Data Chart
|Stator Diameter||22.0 mm (0.866 in)|
|Stator Thickness||4.0 mm (0.157 in)|
|Number of Stator Slots||12|
|Number of Magnet Poles||14|
|Motor Wind||32 Turn Delta|
|Motor Kv Value||1960 RPM per Volt|
|No Load Current (Io)||0.58Amps @ 8 Volts|
|Motor Resistance (Rm) per Phase||0.153 Ohms|
|Motor Resistance (Rm) Phase to Phase||0.102 Ohms|
|Maximum Continuous Current||13 Amps|
|Max Continuous Power (2-cell Li-Po)||90 Watts|
|Max Continuous Power (3-cell Li-Po)||140 Watts|
|Motor Weight||24.6 grams (0.87 oz.)|
|Outside Diameter||27.0 mm (1.063 in.)|
|Motor Shaft Diameter||3.00 mm (0.118 in.)|
|Prop Shaft Diameter||5.00 mm (0.197 in.)|
|Motor Body Length||14.2 mm (0.559 in.)|
|Overall Shaft Length||32.5 mm (1.146 in.)|
|Motor Timing||5-10 degrees|
|PWM Frequency||8 KHz|
Motor Performance Graphs
The following downloadable PDF files show the performance data curves of the Cobra CM-2204/28 motor, over its entire throttle range, with a variety of propellers. These graphs can be downloaded and printed to use as a reference for calculating power requirements at specific thrust levels, and enable the user to calculate flight times, current draw and other motor parameters.