Calibrate the IMU on a Phantom 3 or Inspire 1

Posted by Kerry 02/08/2016 1 Comment(s) Tips and Tricks,

An IMU calibration on your Phantom 3 or Inspire 1 should be done right out of the box when you receive it, after any firmware update, or if the GO app says it needs to be done. The video below shows you how to do this process and make sure your copter is ready to fly.

1 Comment(s)

Jim Bennett:
02/09/2016, 02:50:37 PM
Reply

One other note on IMU calibration - the copter needs to be sitting on a perfectly level surface.

Leave a Comment