DJI Phantom 2 FPV Basic Kit with H3-3D Gimbal for GoPro (New 2.0 version)

-65% DJI Phantom 2 FPV Basic Kit with H3-3D Gimbal for GoPro (New 2.0 version)
Views: 18,558
  We're here for you! Call us at +1 (303) 552-2300
  Free Shipping on orders over $199

Product Code: MCWH-PH2-2-H33D-BASIC

Cash Rewards: $5.99 (Cash back towards your next purchase!)
Availability: In Stock

Order now and this item will ship TOMORROW!
$1,697.95 $599.00
Qty:


Warning: This product is designed exclusively for outdoor flight. Calibration is required for proper use. Failure to use product responsibly may result in loss, damage, or injury.

This is a complete aerial photography / video production kit. Kit includes:

  • DJI Phantom 2 Version 2.0 Quadcopter with DJI H3-3D Gimbal
  • Black Pearl 7" FPV Diversity Rx Monitor w/  Silver Mounting Bracket and Sun Shade
  • DJI IOSD Mini
  • DJI AVL58 Lite Video Downlink 
  • DJI Cloverleaf Antenna Set
  • 2 Sets of Propellers
  • Vision+ (extended) landing gear pre-installed for extra clearance for your H3-3D Gimbal and GoPro
  • All components professionally installed, calibrated and tested. 
  • GoPro Hero 3 is not included

Ships same day if ordered before 4:30pm MDT.

The Phantom 2 is an evolution of the Phantom. It features the same compact and highly integrated design, but comes with FPV flying and Aerial Photography support right out of the box. Hardware mountings and software tuning are all carried out prior to delivery, meaning with rotors attached, a charged battery and transmitter batteries available it can fly immediately. Additional features include a higher payload, a built-in intelligent battery, H3-3D gimbal support and other functions.







Phantom 2 Quadcopter is the second generation Phantom quad-rotor RC helicopter from DJI and is bundled with the Zenmuse H3-3D 3-axis gimbal. With a larger battery and improved prop design, flying time lasts to up to 22 minutes, compared to around 14 minutes on the original DJI Phantom Quadcopter. This product will appeal to a variety of potential users, from RC aircraft hobbyists who want to record their flights to videographers and photographers looking to open up a whole new range of shooting possibilities.

 

Customized H3-3D Gimbal Support

A customized H3-3D gimbal, designed for easy assembly and connection is available for the Phantom 2. Its stability ensures high quality footage and the camera’s pitch can be controlled from the transmitter, allowing pilots to be more creative.

 

Can-bus Expansion Module for Function Expansion

Functions of the Phantom 2 can be expanded through its Can-bus module, which can be used for IOSD or 2.4 G Bluetooth Datalink.
 

Easy upgrade to FPV


AV output and video-downlink power cables already installed, ready for upgrade.

Precision Flight and Stable Hovering

Integrated GPS auto-pilot system offers position holding, altitude lock and stable hovering allows attention to be focused on shooting.

25min Flight Time & Intelligent Battery

High capacity, high performance 5200mAh intelligent Lithium Polymer battery offers up to 25 minutes of flight time, with battery capacity data, overcharge/discharge protection and maintenance reminders for greater reliability.

Auto Return-to-Home & Landing


If the Phantom 2 and its controller disconnect during flight for any reason, the Naza-M autopilot system’s failsafe protection will come to the rescue. Outputs of all command sticks on the controller will go to the center position and if the signal is good enough the Phantom 2 will return to home and land automatically. You can also program a One Key Go Home function through the Assistant software.

Intelligent Orientation Control (IOC)

In traditional multirotor flight, forward is tied to the direction of the nose. Using IOC, it flight is much simpler. In Course Lock mode, forward direction is will always be the direction the nose faced at takeoff, while in Home Lock mode forward takes the Phantom 2 back to where it took off. Users can adjust these settings as they please.

Advanced Power Management

Power consumption has been improved by a custom power management system that monitors power capacity and voltage. Low power is indicated by the LED. If power drops below safe levels, the Phantom 2 will land automatically during low battery level.
 

Easy Battery Replacement

Integrated battery compartment allows for near instant battery changes.

Self-tightening Propeller

Install propellers without worry using self-tightening propellers that only install in the right place. These will also tighten during flight, enhancing safety. All propellers have been carefully and dynamically balanced to eliminate the jello effect.

Phantom 2 Specifications:

Aircraft

PHANTOM 2 Weight (w Battery)

Hover Accuracy

(Ready to Fly)

Max Yaw Angular Velocity

Max Tilt Angle

1000g

Vertical:0.8m; Horizontal:

2.5m

200°/s

35°

Max Ascent / Descent Speed

Max Flight Speed

Diagonal Length

 

6m/s

10m/s

350mm

 

Flight Time

Take-off Weight

Operating Temperature

 

25mins

1.3kg MAX

-5 ~ 50°C

 

Battery

Battery

Battery Weight

Charging Current

 

5200mAh Lipo

340g

4A

 

Transmitter

Operating Frequency

Communication Distance

(open area)

Receiver Sensitivity

(1%PER)

 

2.4GHz ISM

1000m

-97dBm

 

Battery

Power Consumption

   

4 AA Batteries

100 mA@6V

   

 

Black Pearl RC801 Specifications:

Black Pearl RC801 7" Monitor with built in battery and 5.8 Ghz Dual Diversity 32 Channel Receiver, 12V Charger and Sun Screen.  Compatible with DJI 5.8 Ghz Transmitters and more.  Includes standard rubber duck antennas.  For improved range, try out the Mushroom Antenna set and Panel Antenna from Flysight.

Display Screen Diagonal 7 inch
Resolution 1024X600
Contrast 700:1
Luminance 300cd/㎡
Wireless Receiving Working frequency ISM 5.8GHz
Band CH 1 CH 2 CH 3 CH 4 CH 5 CH 6 CH 7 CH 8
A 5865 5845 5825 5805 5785 5765 5745 5725
B 5733 5752 5771 5790 5809 5828 5847 5866
E 5705 5685 5665 5645 5885 5905 5925 5945
F 5740 5760 5780 5800 5820 5840 5860 5880
Sensitivity -90dBm±1dB
Channel 32Channel ( 4 Band X 8 Channel )
Antenna Port 2 X SMA,50oh
Diversity receiving Antenna diversity
TV Syste NTSC/PAL
Video output level 1.0Vp-p Typ,75oh
Audio output level 1.0Vp-p Typ,10Koh
AV Port RX1 AV OUT Video, Audio output
RX2 AV OUT Video, Audio output
DIV AV OUT Diversity receiving, Video, Audio output
AV IN Video, Stereo Audio input
HDMI IN(A Type) Support HDMI 1.3 Digital Input, Support HDMI Audio in
Built-in Microphone 8Ω/1W X 2
Power Supply DC IN 7~28V/ 2A
DC OUT Output Voltage: DC IN or battery voltage
Output Current: 1A
Battery (INCLUDED) 11.1V/1000mAh(3 series LiPo cells)
Consumption 12V input:7.8W
Dimensions Main Body 183X126X19.5mm(not include sun shadow)
Battery 105X87.5X6.7 mm(not include prominent part)
Weight Main body 350 g
Battery 95 g
Other Tripod connector General 1/4 "thread
Working Temperature -10℃~+65℃

Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them.

There are no reviews for this product.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: